Jinan spray painting photo editor answers for you: spray painting post manufacturing is an indispensable process in the spray painting basin, which plays a very important role in the chapter and quality assurance of the whole operation. A fast and poor post manufacturing will not only make the works better, but also affect the efficiency of the company. From this point of view, spray painting post manufacturing is very important, let's take a look at the key of spray painting post manufacturing.
Output: the first task after the completion of picture planning and manufacturing is output. In this process, the output picture must merge all layers, and generally need to be saved in. TIF or. JPG format. If the picture is manufactured on Apple computer, it must have suffix. This process has several problems to pay attention to: first of all, spray painting is different from printing, the color of spray painting is much more beautiful than printing.
Therefore, it is necessary to set RGB form instead of CMYK form in spray drawing. The surface of spray painting is often very large, and some defects that are not easy to find in the printed matter will become obviously exaggerated after enlarging the output, and this point can not be found through the sample, so the spray painting must be enlarged to 100% after manufacturing and carefully checked. On the text of many pictures, more careful correction. As there is no ready-made color code in the output of inkjet printing, the mastery of color deviation depends on experience, which is the intention of making small samples.
Trade off: the end of the screen output, the machine will take the initiative to cut paper. The size of the picture and the paper need to choose, to cut regular. When we cut the film, we should also use scissors to go along the marking line, because it will facilitate the film operation in the mulching, and can ensure the quality and success rate.
Film mulching: Film Mulching operation requires high cooperation of personnel. A successful film mulching operation is a highly coordinated product of "paper feeding", "film pulling" and "rock and roll".
The specific operation is as follows: in the case of ensuring that the drawing width is appropriate, the length of the film should be appropriately lengthened (generally 20cm). The first is to adjust the rotation and torsion of the roller until there is no resistance and it is slightly tight. The membrane is sent horizontally to ensure that there is no side deviation in the process of membrane walking, and the membrane is not kneaded. Then, pull up the membrane. When the membrane is coming to the end, hold the roller firmly and pull the membrane hard to ensure that the end is flush.
At this moment, the film puller droops the protective film, and the "paper feeder" can enter the picture (one end of the picture should be flush), so as to ensure that the picture is flat and the two sides are parallel to the film. When the preparation is in order, the "rock" can swing slowly, and after seeing that there is no problem, it can move to the end at a constant speed. In this process, the feeder should carefully check whether there is hair and other things on the screen, and try to remove them. After the film is coated, it will enter the "trade-off" operation.
The inks used in inkjet painting are different, and the quality of inkjet painting has a certain impact. Some inkjet painting companies have aging equipment and poor ink use. The quality of the products they spray out is very poor, and the color is uneven. All of them are sprayed into stripes, which is very ugly. Moreover, as soon as the sun shines, the color fades when the wind blows. And it will have a certain impact on the post production of spray painting, so we need to pay attention to it.