The operation methods of several fonts used in the production process of acrylic luminous characters are different:
1. Production and requirements of flat drum characters:
A word is traced on the density board with a copy paper, and 5cm is left on the edge. The corresponding straight knife is installed with a hand carving machine, and the word is opened on the outside (internal wiring, external wiring). After the mold is opened, the mold is planed with a file. Then use a word file and sandpaper to make the angle of yin and Yang and mold into a circular arc, which must be smooth and even, and finally use sandpaper to polish. Computer engraving machine can also be used to carve the mold, and the high edge can be smoothed after being raised enough.
2. Production and requirements of sharp drum characters:
Step 1: it is the same as the method of making flat drum, but the angle of each side does not form an arc. The second step: heightening and forming. According to the size of the word, the stroke width (the widest quotation, draw a line between the second layer to see that the slopes on both sides are 90 degrees, this angle is used to locate the higher thickness, and then select the appropriate 45 degree angle of the knife on the multi-functional machine, open drum on the face, or 3 seconds of 502 glue to play a gradual glue dripping. When the difficulty does not inhibit the damage of the mold, there is no sharp part, increase The place of repair, the place of repair, and the large-scale word can't buy Tableware, but can only be made by hand, the shape of repair.
3. Production and requirements of drum characters:
Step 1: use the same method to make the flat barrel character, but do not polish each side and corner into a circular arc temporarily.
Thank you for your reading and watching. The wonderful content of this article comes from: Jinan luminous character. We will continue to present more wonderful content for you. For details, please click: http://www.hongchenad.cn