山东红晨广告传媒有限公司为您免费提供济南灯箱、济南发光字哪家好、济南广告牌哪家好等相关信息发布和相关资讯,敬请关注!
当前位置: 首页 - 新闻资讯 >

灯箱门头应该怎么固定呢

来源:http://www.hongchenad.cn    发布时间:2019-10-30

  灯箱门头是一个很好的广告牌,有很好的广告效果。那么灯箱门头应该怎么固定呢?济南灯箱公司将为您介绍它的固定流程:

  The door of the light box is a good billboard with good advertising effect. How to fix the door head of the light box? Jinan light box company will introduce its fixing process to you:
  1. 首先确定灯箱的安装位置,根据实际情况和灯箱类型确定安装方法。
  1. First determine the installation position of the light box, and determine the installation method according to the actual situation and the type of light box.
  2. 测量尺寸:根据灯箱背面的安装孔位置或现场实际尺寸,确定灯箱安装的固定点。
  2. Measurement size: according to the installation hole position on the back of the light box or the actual size on site, determine the fixing point of the light box installation.
  3.固定灯箱:
  3. Fixed light box:
  A)场地墙面由铝塑板、木板、铁板等组成,可直接用自攻螺丝固定;
  A) the site wall is composed of aluminum-plastic plate, wood plate, iron plate, etc., which can be directly fixed with self tapping screws;
  B)场地墙为水泥或砖结构,可先用冲击钻钻孔,再用膨胀螺丝固定;
济南灯箱
  B) the site wall is of cement or brick structure, which can be drilled with impact drill first and fixed with expansion screw;
  C)场地墙面由瓷砖、大理石、玻璃等构成。玻璃钻可先钻透表面,再钻膨胀螺丝孔,然后固定灯箱或使用粘胶方法。
  C) the site wall is composed of tile, marble, glass, etc. The glass drill can drill through the surface first, then drill the expansion screw hole, and then fix the light box or use the glue method.
  D)灯箱需要在现场吊起或悬挂。选择安装位置后,根据灯箱安装孔的实际尺寸,确定灯箱的安装点,然后安装吊装件,接地线。
  D) the light box needs to be lifted or hung on site. After selecting the installation position, determine the installation point of the light box according to the actual size of the light box installation hole, and then install the lifting parts and grounding wires.
  4. 接线:正常灯箱电源线的出线端在背面。如果电源在灯箱背面,则可将电源线插头直接切断连接。若电源在灯箱安装位置之外,则可将灯箱电源的出线连接到灯箱边缘,然后将三相插头插入电源插座。
  4. Wiring: the outgoing terminal of the power line of the normal light box is at the back. If the power supply is on the back of the light box, disconnect the power cord plug directly. If the power supply is outside the installation position of the light box, the outgoing line of the power supply of the light box can be connected to the edge of the light box, and then the three-phase plug can be inserted into the power socket.
  5. 固定灯箱:打开灯箱上盖,安装固定点(用电钻钻取灯箱底部电源线,重新安装电源线,用水平尺调至水平状态);
  5. Fix the light box: open the upper cover of the light box and install the fixing points (drill the power line at the bottom of the light box with an electric drill, reinstall the power line, and adjust it to the horizontal state with a level ruler);
  6、开灯,清洁灯箱表面。
  6. Turn on the light and clean the surface of the light box.
  注:导光板超薄灯箱采用电子镇流器,易产生感应电流。安装时请将地线接好,以确保安全。
  Note: the ultrathin light box of light guide plate adopts electronic ballast, which is easy to generate induced current. Please connect the ground wire during installation to ensure safety.
  好了,今天的精彩内容就给大家介绍到这里,不知道大家对济南灯箱公司还有什么疑问吗?欢迎询问我们官网:http://www.hongchenad.cn的在线客服人员!
  Well, today's highlights will be introduced here. Do you have any questions about Jinan light box company? Welcome to our website: http://www.hongchenad.cn for online customer service!

鲁公网安备 37011202000860号